DRAG2ZERO.66 Pole System

Includes mounting kit, armrests and computer mount

From: £1,165.00

POL-66 Side-Photoroom
transparent-Photoroom (49)
POL-66 Rear third-Photoroom
POL-66 Grips-Photoroom
POL-66 front third-Photoroom
transparent-Photoroom (50)
POL-66 ARMREST-Photoroom

OUR MOST AERODYNAMIC SYSTEM EVER

Wind Tunnel in a Box

The DRAG2ZERO.66 pole system delivers 15 years of wind tunnel expertise in a box, translating proven aerodynamic science into a ready-to-use solution. Developed through years of testing, refinement, and real-world validation, every detail of the system is designed to reduce drag and optimise airflow with precision. Instead of guessing or experimenting, you get the confidence of data-driven performance—engineered to perform exactly as intended the moment it’s deployed, providing 10-13 watts of real-world instant aerodynamic gains over standard pole systems. 

EVERY POSITION IS UNIQUE

6-Axis of Adjustment

A DRAG2ZERO mounting kit is all about adjustment and unlocking your 6 Degrees of Freedom (6-DoF). This provides you with three translational movements—forward/backwards, left/right, and up/down — and three rotational movements—rotation around the vertical axis (yaw), side-to-side tilt (pitch/angle), and roll. In aerodynamic rider testing, controlling and measuring all six is critical because wind never hits an object from just one perfectly aligned direction in the real world.

SPEED STARTS WITH CONFIDENCE

Unrivalled Support

The DRAG2ZERO.66 pole system provides unrivalled rider support and comfort, designed to reduce fatigue and maintain stability during long-duration rides and racing. By minimising unwanted movement and optimising load distribution, the system helps riders hold their aerodynamic position whilst maintaining comfort and efficiency for extended periods without strain. The result is greater consistency, improved focus, and sustained performance—so riders can stay comfortable, supported, and aerodynamic no matter how long the effort lasts.

DESIGNED TO A NEW LEVEL

5 Years in the Making

DRAG2ZERO.66 is the result of five years of design, development, rider testing, and relentless iteration, with every version refined through real-world feedback, rider testing and wind tunnel data. Every iteration was made with the rider in mind — improving comfort, usability, and aerodynamic efficiency — until no compromises remained. This meticulous process ensured that the final product delivers real-world aerodynamic performance, durability, and confidence, bringing a truly refined, rider-tested solution to consumers.

A SCIENTIFIC APPROACH TO EVERYTHING

Data Driven

DRAG2ZERO products are fundamentally data-driven, built on rigorous wind tunnel testing at two of the most respected facilities in the world: the Mercedes-AMG F1 Wind Tunnel in Silverstone and the FUSION Wind Tunnel in Denmark. These environments allow precise control of airflow, yaw, and rider position, producing repeatable, high-resolution aerodynamic data rather than assumptions or simulations. Every design decision is validated and refined through iterative testing until measurable gains are achieved. The result is equipment grounded in elite-level motorsport methodology, delivering proven aerodynamic performance that translates directly to real-world gains.

BECOMING ONE WITH YOUR BIKE

A Seamless Transition

DRAG2ZERO.66 pole system is engineered to provide a seamless transition from bike to rider, creating a unified aerodynamic system rather than separate components.

A combination of the pole and mounting kit enables consistent alignment and support imrpoving airflow and load distribution, allowing the rider to settle naturally into position without disruption. This smooth integration ensures comfort, stability, and aerodynamic integrity.

Leon 66 Blur
Leon 66 3
Leon 66 tucked
Leon 66 1
Product Details

The DRAG2ZERO .66 pole system represents the pinnacle of DRAG2ZERO’s under-arm ski pole technology, engineered for elite aerodynamic performance and maximum adjustability. The carbon pole and armrest design creates a seamless aerodynamic interface with the forearm, virtually eliminating flow separation and delivering substantial drag savings on average of 10–13 watts over standard poles. The system also offers a very wide adjustment range (up to ~135 mm of reach and 6-degree toe angle tuning), allowing riders to fine-tune their position for both comfort, control and speed.

The .66 prioritises top-tier aerodynamic efficiency, comfort through enhanced forearm support, and the highest level of fit customisation for competitive triathletes and time-trialists.

  • Reduced Drag & Increased Support – With no gap between the pole and forearm and improved aero profiling, the .66 poles and your forearm become one object in the air with virtually no flow separation between them. Combined with an optimised position from the high degree of adjustment offered by the mounting system, body drag is reduced, resulting in an immediate drag reduction of up to 8-10 watts compared to standard poles.
  • The Winged Armrest Range – The .66 system now features our .66 winged armrests that offer 2-3 watt gains.
  • Comfort and Sustainability  – The extra contact between the pole and forearm allows the upper body to be more relaxed, increasing rider comfort and sustainability– for many of our test riders, this has been a real game changer, allowing them to improve overall performance.
  • Increased Adjustability – Through our unique interlocking mounting system, riders will have up to 135mm of reach adjustment and 6° of both positive and negative toe, combined with a choice of angled shims between 12.5° and 30°. This will ensure riders can find the perfect level of adjustment. (For more information regarding system adjustment, please look at the dimensions below. For dimensions on height, reach and grip angle, please see here .66 Reach and height adjustment. We recommend between 12.5 and 20 degrees.

Are you struggling to know what to buy, or looking for an aero bike fit? Why not check out a DRAG2ZERO AeroFit offer?

 

Pole, Armrests and Grip

.66 Pole and Armrest – 3K woven carbon fibre, 

Grip – 3D Printed Nylon

Mounting Kit

Universal Direct Mounting Kit – Universal Direct Mount, Gen2 Angled Shims, Gen2 Pole Clamps, 7075 Aluminium, 322g

Mono Conversion Mounting Kit – V1 Mono Conversion Plate, Gen2 Angled Shims, Gen2 Pole Clamps, 7075 Aluminium, 522g  

Gen2 Riser Set – 7075 Aluminium, 5mm pair – 8g, 10mm pair – 19g, 20mm pair – 42g, 40mm pair – 78g

Gen2 Angled Shim Set – 7075 Aluminium, 12.5 Degree pair – 50g, 15 Degree pair – 50g, 17.5 Degree pair – 54g, 20 Degree pair – 58g, 25 Degree pair – 64g, 30 Degree pair – 74g

DUAL BTA System

Material – 3D Printed SLS Nylon, Carbon Fibre

Weight – approx 120g, depending on individual specifications

 

Computer Mount

Material – 3D Printed SLS Nylon, Carbon Fibre

Weight – approx 60g, depending on individual specifications

 

System Weights

.66 Pole and Armrests – Approx 666g

.66 Pole Set – Approx 793g

.66 Pole and System – Approx 1.1kg

Product Support, Assembly & Compatibility.
HOLIDAY SHIPPING

Please note our last posting date for UK orders is
Monday 22 December.

For orders being sent outside UK it will be Friday 19 December. If you would like your order to arrive before Christmas then please order soon and place a note on your order.

Any orders made after the above dates will be sent w/c
5 January 2026.

We’d like to thank you for your custom and wish you all a very
happy and healthy Christmas and New Year.