DUAL BTA System
We have 3 different BTA Systems,
If you have a DRAG2ZERO.44, DRAG2ZERO.55 or DRAG2ZERO.66, and you are using our Gen2 Pole Clamps and finishing kits, then you would need our DUAL BTA System
If you don’t have our Gen2 Pole Clamps, you will need our Universal BTA system
If you are running our .44 Armrests, you would be best to look at either the Universal BTA System or the .44 Armrests BTA
Universal BTA System
Compatible with third-party pole systems, with armrests bolt spacings between 80mm and 180mm
Answer a few short questions to pinpoint exactly which BTA System is right for you and your setup.
DUAL BTA System Spares
Below are extra parts that you may need to customise your DUAL BTA system further.
If you have any questions, please use our contact form here: Contact.
Wide DUAL BTA Base V2
Compared with DUAL BTA Angled Shims and Gen2 BTA Mounting Plates
Standard DUAL BTA Base V2
Compared with DUAL BTA Angled Shims and Gen2 BTA Mounting Plates
DUAL BTA Height Adjustment
30mm height adjustment kit for the DUAL abd Universal BTA System
Universal DUAL BTA Plates
Available in 2 sizes for armrests bolt spacings between 80mm and 180mm
Gen2 Mounting Plates
Carbon mounting plates for your DUAL BTA System on Gen2 Pole Clamps