Mounting Kit Selector

Not sure what mounting kit you need? Check out our mounting kit selector tool to find the right option for you and your bike. 

Mounting Kit Finder
FIND YOUR
MOUNTING KIT

Answer a few questions about your bike and we'll identify the exact mounting kit you need — using the official DRAG2ZERO compatibility guide.

30+ bike models covered Bike-specific & universal kits Mono & dual podium
Step 1 of 3 — Bike Brand
What brand is your bike?

Select your bike brand. Brands with dedicated or model-specific kits are listed individually — if yours isn't shown, select the group that best matches your basebar type.

Step 2 of 3 — Model Year
Which Canyon Speedmax?

The Canyon Speedmax has used three different cockpit systems across model years, each requiring a different mounting solution.

Step 2 of 3 — Model
Which Cervélo model?

Select your Cervélo setup to find the correct kit.

Step 2 of 3 — Model
Which Factor model?

Factor uses different cockpit systems depending on model and year.

Step 2 of 3 — Model Year
Which Giant Trinity?

The Giant Trinity uses different cockpit systems depending on the model year. The 2025+ uses a mono riser; older models use a standard dual basebar.

Step 2 of 3 — Model Year
Which Liv Avow?

The Liv Avow changed cockpit systems with the 2025 model year update.

Step 2 of 3 — Model
Which Scott model?

Select your exact Scott model — the Plasma 5 and Plasma 6 / RC TT require different solutions.

Step 2 of 3 — Model & Year
Which Specialized model?

The Shiv TT and Shiv Tri use different mounting systems, and requirements vary by year. Select the option that best describes your bike.

Step 2 of 3 — Model Year
Which Trek Speed Concept?

The 2022+ Speed Concept uses a direct-mount system. Pre-2022 models use a mono riser conversion with a Trek-specific spacer.

Step 3 of 3 — UCI Compliance
Do you need a UCI-legal mounting kit?

DRAG2ZERO offers two mono conversion kits. The V2 is UCI legal and suits both triathlon and time trial racing. The V1 is non-UCI, lighter and suits triathletes.

Step 2 of 3 — Basebar Type
What type of basebar does your bike have?

The mounting kit depends on your bike's cockpit setup. Check the underside of your basebar for bolts, or refer to your bike manual.

Step 3 of 3 — Bolt Spacing
What is your bolt spacing?

Measure the centre-to-centre distance between the two mounting bolts on your basebar. This determines which universal kit fits.

Step 2 of 3 — Model
Which Argon 18?

Mounting requirements vary across Argon 18 models — select yours to find the correct kit.

Universal Mounting Kits

Compatible with a dual podium system, which has a flat mounting surface on either the basebar or proprietary riser and an M5 or M6 bolt spacing between 12mm and 50mm.

We have 3 different Universal Mounting Kit options, please see below.

Universal Direct Mount

Compatible with M5 and M6 bolt-up basebar systems with bolt spacings between 12.5mm and 39.5mm.         

Select Options

Universal Baseplate Mount

Compatible with M5 and M6 bolt-up and bolt-down basebar systems with a bolt spacing between 12mm and 41mm.

Select Options

Universal Width Reach Plates

Compatible with M5 and M6 bolt-up and bolt-down systems with a bolt spacing between 14mm and 50mm.

Select Options

Mono Conversion Mounting Kits

We have 2 types of mono conversion mounting kits. 

These require a flat mounting surface and an M6 bolt spacing between 20mm and 85mm

V1 Mono Conversion Kit

Non-UCI Legal. 90-120mm podium width options. Recommended for both triathletes and time trialists.

Select Options

V2 Mono Conversion Kit

UCI Legal. 80-130mm podium width options. Recommended for both triathletes and time trialists.

Select Options

Round Bar Mounting Kits

Compatible with 31.8mm handlebars and basebar systems.

Round Bar Clamps

Compatible with 31.8mm handlebars and basebars.

Select Options

Bike-Specific Mounting Kits

Some bikes require a specific mounting kit; these bikes are listed below.

If your bike isn’t listed, you will most likely require a Universal mounting kit if you have a dual podium system or a mono conversion kit if you have a mono riser system. Please check comaptibility on the relevent pages.

Cadex Conversion Kit

Compatible with the Cadex Tri Frameset. Requires Gen2 Angled Shims and Risers.

Select Options

Cervelo P5 EX10/EX14

Compatible with the Cervelo P5 with either EX10 or EX14 mono risers. Requires Gen2 Pole Clamps.

Select Options

Cervelo 3T Aduro Basebar

Compatible with the Cervelo 3T Aduro Basebar. Requires Gen2 Risers and Gen2 Angled Shims.

Select Options

Canyon Speedmax 2019-20

Compatible with the Canyon Speedmax 2019-2020. Requires Gen2 Risers and Gen2 Angled Shims.

Select Options

Trek Speed Concept 2022+ Direct Mount

Compatible with the Trek Speed Concept 2022+. Requires Gen2 Risers and Gen2 Angled Shims.

Select Options

Trek Speed Concept 2022+ Basebar Mount

Compatible with the Trek Speed Concept 2022+. Requires Gen2 Risers and Gen2 Angled Shims.

Select Options

Trek Speed Concept 2022+ Riser Mount

Compatible with the Trek Speed Concept 2022+. Requires Gen2 Risers and Gen2 Angled Shims.

Select Options

S-Works Shiv TT

Compatible with the S-Works Shiv TT. Requires a Universal Mounting kit, Gen2 Risers and Gen2 Angled Shims.

Select Options

S-Works Shiv Tri

Compatible with the S-Works Shiv Tri. Requires a Universal Mounting kit, Gen2 Risers and Gen2 Angled Shims.

Select Options

Factor Hanzo

Requires our Universal Angled Shims 

Select Options

Quintana Roo V-PRi

Requires our Universal Angled Shims 

Select Options

Ventun One

Requires our Universal Angled Shims 

Select Options

TriRig Alpha One

Require our Universal Angled Shims 

Select Options

 Bianchi Aquila RC 2026

Require our Universal Angled Shims 

Select Options

Mounting Kit Extra

Extra risers, angled shims and pole clamps can be found here.

If you are unsure, please fill in an enquiry form here, Contact.

Width Adjustment Plates

Micro width adjustment of 7.5mm, 10mm, 15mm and 17.5mm on each side. Compatible with Universal and Gen2 Angled Shims

Select Options

Gen2 Pole Clamps

Provides up to 6 degrees of toe adjustment each side. Compatible with Universal and Gen2 Angled shim. 22.2mm pole compatible.

Select Options

Gen2 Riser Sets

Compatible with Gen2 Angeld Shims and Drag2Zero Mounting Kits. Achieve up to 100mm of additional risers

Select Options

Gen2 Angled Shim Sets

Compatible with Gen2 Riser and Gen2 Pole Clamps. Achieve angles between 12.5 degrees and 30 degrees.

Select Options

Universal Riser Sets

Compatible with flat mounting systems and Universal Angeld Shims. Achieve up to 60mm of additional risers.

Select Options

Universal Angled Shim Sets

Compatible with flat mounting systems and Universal Angeld Shims. Achieve angles between 12.5 and 25 degrees.

Select Options

Gen1 Pole Clamp Set

Compatible with Universal Angled Shims. Provides a 15mm pole to podium offset. 

Select Options
HOLIDAY SHIPPING

Please note our last posting date for UK orders is
Monday 22 December.

For orders being sent outside UK it will be Friday 19 December. If you would like your order to arrive before Christmas then please order soon and place a note on your order.

Any orders made after the above dates will be sent w/c
5 January 2026.

We’d like to thank you for your custom and wish you all a very
happy and healthy Christmas and New Year.