Supplied pre-cut to fit the Drag2zero carbon armrests
.44 and .66 armrest foam is one-piece, adhesive-backed, 6mm.
Gen 1 armrest foam – order .44 short arm rest foam, this will need trimming slightly to fit.
Please ensure the pads are pressed firmly into position so that the glue grips firmly to the armrest before use. Apply pressure to the pad to achieve this and leave it for 24 hours before using the bike, if possible. Gen 1 – Using a screwdriver or punch, make a hole through the centre base velcro for the pole clamp bolt.
Armrest foam is attached to armrests via adhesive backing. During transport, to prevent the foam from becoming detached, we recommend securing it to the armrest using tape.
