Universal Baseplate Mounting Kit

For use with Gen2 Drag2Zero angled shims and risers. Enables mounting of Gen2 Angled Shims and Gen2 Risers onto your basebar or proprietary riser. Provides a clean and aerodynamic mounting system along with width adjustment. Automatically offsets Drag2Zero podiums by 12.5mm to either narrow or widen the podium compared to the proprietary system. Enables up to 100mm of additional riser to be used to guarantee your desired stack height can be achieved. Compatible with Gen2 Angeld shims to achieve from 12.5 to 30 degrees.

Supplied with:

• 2 x Gen2 Universal Baseplate
• 4 x M5 or M6 Nuts

Requirements for your system:

• Flat mounting surface on either basebar or proprietary riser
• Basebar with bolt fixings from beneath and above
• 12mm to 40mm bolt spacings
• M5 or M6 basebar bolts (we supply nuts to suit)

Only compatible with Gen2 Angled Shim Sets and Gen2 Riser Sets due to specific 28mm M6 bolt spacing and interlocking design. This enables up to 100mm of additional risers to be mounted on top

For dimensions and assembly instructions see here: Universal Baseplate instructions