Universal Direct Mount Mounting Kit

For use with Gen2 Drag2Zero angled shims and risers. Enables direct mounting of Gen2 Angled Shims and Gen2 Risers onto your basebar or proprietary riser. Provides a clean and aerodynamic mounting system. Enables up to 100mm of additional riser to be used to guarantee your desired stack height can be achieved. Compatible with Gen2 Angled shims to achieve from 12.5 to 30 degrees. Ideal for high-stack systems, providing a clean, stiff and aerodynamic dual podium solution.

Supplied with:

• 2 x Gen2 Direct Mount risers
• 4 x M5 or M6 Barrel Nuts
• 1 x M4 Barrel nut location bolt

Requirements for your system:

• Flat mounting surface on either basebar or proprietary riser
• Basebar with bolt fixings from beneath
• 12.5mm to 39.5mm bolt spacings
• M5 or M6 basebar bolts (we supply barrel nuts to suit)

Only compatible with Gen2 Angled Shim Sets and Gen2 Riser Sets due to specific 28mm M6 bolt spacing and interlocking design. This enables up to 100mm of additional risers to be mounted on top

For dimensions and assembly see here: Universal Direct Mount instructions