SRAM Wireless Blips Basebar grip

DRAG2ZERO SRAM Basebar Grips for SRAM S-900 lever and AXS Wireless Blips.

Designed to reduce flow separation of the back of SRAM S-900 brake levers, whilst also improving comfort and grip on the basebar and incorporating the SRAM AXS Wireless Blips.

Key Features:

• Split S-Grip design means you don’t have to disconnect hydraulic cables, making installation simple
• Internal silicon gripper strips to prevent grip rotation on the basebar
• Super lightweight at just 55grams
• Textured top surface for improved grip in all conditions
• Easy SRAM AXS Wireless blip accessibility for easy changes

Available in three sizes: Specific to your bike’s basebar grip diameter.

• Ø 22.7mm
• Ø 24mm (will suit Ø 23.5mm)
• Ø 25mm (will suit Ø 24.5mm)

Not sure what size you need?

If you have one of the following bikes with the stock base bar supplied with that model, then this is the size you will need:

Please note we do not fit oval basebars.

If your basebars don’t match, please size up to the nearest half. i.e. if your bar measures 23.7mm, please select 24mm.

If your bike is not on that list, please measure your basebar with one of the following methods:

1. Use a Vernier Calliper to measure the outside diameter of your base bars. Please check multiple points along the basebar grip area to ensure your basebars are not oval.
2. If you do not have a vernier calliper, measure the outside circumference of the basebar with a tape measure, then use the table below to identify which grip you need.
3. Ensure your bar is a cylinder with a length of at least 75mm to allow enough room for the grips to fit. 

If you have any further questions, please let us know at info@drag2zero.com or Tel: +44 (0)1295 236115